Twin Pump Assembly Sale Thread

[phunk]

Brandon and I discussed it this morning. Rather than a group buy, we are just going to offer a limited time sale on them for the rest of the month for $50 off.

You can order them on the website as normal as the price has been adjusted for the sale. Here is a link: http://cj-motorsports.com/cat017.htm

If you have any questions, please post them on up.

I just wanted to make sure that everyone knows they are anodized blue now! I am sure no one cares since it cannot be seen after installation anyhow, but only the first couple were anodized the color shown on the web site, we need to update that page with good pics of the blue production units.

Feel free to link these up anywhere you want.

Thanks everyone,
Charles

[sk8world]

post up once you know what all pumps will fit.

[20b 3rd gen]

Will you be offering it fully assembled with pumps and lines

[13bmaniac]

the paypal link on the website is not working

[phunk]

hmm i just tried the button on the site and it worked. the paypal address is sales @ cj - motorsports . com

the link charges 265 + 15 shipped, but if you are within a few states of IL then 10 shipping is fine

-charles

[13bmaniac]

hello my friend i just buy the tein pump sistem i just send you and email to let you know i did.my mail is dnl_barba@yahoo.com that is the addres i send payment please repy me back to confirm payment and the estimate shipping date im located in miami fl the sistem charge me 15$ for shipping.
thanks

[phunk]

i got your payment, i sent you an email. thanks

[Ian]

Is this available for the 1988 "FC" rx7?

Ian.

[phunk]

We dont currently have an FC version... For all I know, they use the same tank flange... can anyone confirm that the fuel pump assembly flange is actually different on the FC? I assume it is, but I havent seen one.

[MotoTek]

Are you guys planning a group buy or discount for the v2.0 fuel rail?
I'm ready to buy, but if i can get it cheaper I'll wait. haha =D

[phunk]

when the 2.0 rails come out, they will most likely be at regular retail price that the 1.0s went for before the sale :)

[Fourtyounce]

sent payment for some items ...

[MotoTek]

Thanks phunk. I'll be patiently waiting for them. :drool5:

[phunk]

sent payment for some items ...

We got the payment.

I havent updated the website yet, I hope you dont mind... the injectors adapters are no longer anodized. Our anodizer was charging us an arm and a leg for them cause he said they are time consuming to setup being so small. I know you cant see them anyway as they are completely submerged in the bung, but some people are particular. Let me know if thats a problem, otherwise your stuff will be on its way within 24 hours.

[Fourtyounce]

sent you a PM ...

[phunk]

replied

[phunk]

UPDATE: The photograph on our website showing the hardpipes with the twin Bosch setup is going to be taken off the site by tomorrow. The hardpipe WILL NOT FIT. We just found out that the setup in that picture has never been installed yet and we have confirmed that with it setup like the owner did in that picture, it will NOT fit inside the gas tank. The pumps have to be raised up higher, much higher than shown in that picture. So much higher that all Bosch units that are shipping will be coming with the brackets higher up than the walbro kits.

In fact, the Bosch pumps are so much taller that a straight direct line to the bulkhead fittings will not work because they are so close that they would kink. A loop is needed to plumb the hose from the pump to the bulkheads.

For those of you who have already ordered the Bosch unit, no worries, yours are shipping with the shorter stands to raise the pumps up.

We apologize for the misleading pic with the hardpipes, we thought it was really cool too. Unfortunately no one ever told us that it wouldnt fit in the tank after doing that and we could not tell by just looking at those pictures that were sent to us alone.

[13bmaniac]

hello my friend nice to hear that, i think its just in time, just want to tell you guys the the paypal payment already clears to your account so i want to know when you are going to ship the twin bosch set up.
thanks

[KaiFD3S]

Guess I will have to modify mine then since I currently own that kit in the pic of your website...lol..

[phunk]

hello my friend nice to hear that, i think its just in time, just want to tell you guys the the paypal payment already clears to your account so i want to know when you are going to ship the twin bosch set up.
thanks

sorry for the delayed response. the bosch units purchase during this sale will ship on monday. we are gonna use the weekend to measure up and make sure the bosch units shipping are going to correctly fit now that we have this new information.

[phunk]

Guess I will have to modify mine then since I currently own that kit in the pic of your website...lol..

if you want you can send it to us and we can shorten the rods for you if you wish. we are going to shorten them about 1.5" on the bosch kits. just FYI also, the level sensor bracket on your assembly, at least in the picture, is upside down and holding the sensor too low.

[KaiFD3S]

Would I need to send you the whole thing or can I just send you the rods? Let me know which one's to send...I will fix the level sensor...

[13bmaniac]

hello its already tuesday and like you guys said that the twin punp sistem will be shipped on monday just to know if already been shipped or are you still waiting to ship this.
thanks

[phunk]

walbro units have shipped (with exception of one or two, waiting for more of the bulkhead fittings to arrive probably tomorrow), bosch ones are undergoing final comparisons of measurements to double check that they fit correctly now and are leaving probably tomorrow when the restock of bulkhead fittings arrive.

[phunk]

ok, there is more going on with the bosch assembly then we thought. Here is a copy of the email sent to everyone who has ever purchased a Bosch assembly.

=======

There has been recent fitment issues found with the current bosch assembly.



The dual pump bracket was initially designed around walbro pumps. By a customers request we machined some Bosch brackets for the existing kit. We thought we had confirmation of fitment, but it turns out that we had a misunderstanding.



The bosch version of our twin pump assembly is undergoing a few minor changes for proper clearance and fitment in the tank.



Anyone who has this assembly already may either send it in to us for swapping out the adjusted bracketry parts, or can request us to simply ship them the revised components to bolt to the top plate.



Those of you currently waiting for this assembly, shipping will be delayed until as long as the 14th of April, but hopefully sooner. In attempt to provide the best customer service we can, we are offering 3 options for you valued customers.



1: Refund on the order

2: Switch order to Walbro bracket

3: Wait it out until the 14th



If you wish to take option 1 or 2, please reply to this email and let me know. Otherwise we will assume you don't mind waiting up to the 14th.
================

To you walbro guys, you probably already got your tracking # from us via email. No issues with the walbro units, we have been running it for a while now and so have other people.

Basically the Bosch assemblys need to have the pumps scoot over a bit, and the mounting rods shortened.

This time we are going to test fit it ourselves to get it perfect like we did with the walbro kit.

[13bmaniac]

any news or udpates for the bosh units????

thanks

[phunk]

we have finalized what changes are being made and assembling the units to begin shipping on the 14th. they will probably all leave on that monday.

[13bmaniac]

hey did the twin pump sistem levae today

[13bmaniac]

hello??? please keep this posted to the people that have wait or pleaselet us know if the sistems are finished or has been shipped.
thanks

[oorx7]

Sorry, I didn't respond sooner. The new parts are being machined now. They should go out tommarrow. We had to order a couple of things to make this go as smoothly as possible. In other words, you will not have to modify any thing, just swap out the old with the new.

We will be providing you with new threaded rod, new aluminum stantions, and a new leval sensor bracket. We will ask that you ship the stuff back that you replace. Because it can still be used for the Walboro assemblies.

Thanks for your patience,
Brandon

[13bmaniac]

Sounds Good Just Let Us Know When You Ship The Assembly.
Thanks

[13bmaniac]

nothing yet guys???

[phunk]

they are done. the tank flange bolts should be here tomorrow. they will be leaving this week, finally!

thanks for the patience everyone, just needed to make the adjustments to reduce frustrations while installing... its still tight, but its not too bad!

[oorx7]

Figured I would take some pics of one. You will need to put the pumps in side the tank then attach the level sensor assembly to the top of the pump assembly.

http://i217.photobucket.com/albums/cc96/oorx7/3.jpg

http://i217.photobucket.com/albums/cc96/oorx7/2.jpg

http://i217.photobucket.com/albums/cc96/oorx7/1.jpg

We were using a local provider for our hardware, that is not living up to our needs. We have decided to change vendors. It will cost us a little more but don't worry it won't be reflected in the price.

Again thanks for your patience,
Brandon

[13bmaniac]

hello my friends i just receive your email with the tracking and intruction to install the sistem, i just woderin if you also included intsall intruction with the sistem, also i think you should do a graphic write up with images about instalation.
thanks

[BNA_ELLIS]

Brandon do you have any personal recommendations for a sock to use with these pumps?


rgds
Brian

[johnnyrex7]

What good guys just wondering if the production of the twin Bosch assembly is on there way. Really waiting for them thanks