Thread pitch of brake caliper bleeder screws?

[need RX7]

After contemplating the replacement of a snapped bleeder screw today, I decided I would be best off putting Speed Bleeders in all the calipers. What pitch do the FC calipers take? Are they all the same all around? What about 4-pot vs single piston fronts?

[RETed]

Fronts are 8mm x 1.0.
Rears are 7mm x 1.0 - both of them.

These are for the "big brakes" - 4-piston fronts and vented rears.


-Ted

[josh18_2k]

considering you have a snapped bleeder...
be aware that you have to be gentle to speed bleeders! they are much more fragile than standard ones. hand tight with a very small wrench.

[need RX7]

Haha yeah, I'm usually pretty gentle with them, but this one was rusted shut, and I got frustrated and gave it a huge tug (giggity) and it broke off. I figure if I start out with non-rusty ones, we'll be all good :lol:.