well finishing up the last little tid bits i didnt want to have to spend any money on something as trivial as a power steering fluid cooler so i took the old setup cut and rbent some of it and tigged 2 pieces together to end up with a rather oem looking and mounting piece if i do say wo myself.
heres what i ended up with rebent and welded up
and here it is installed just behind the intercooler and mounted using stock mounts rebent as well the other side looks about the same fyi
and i didnt order any 1.5" aluminum bends for the radiator pipes so once again i had to find something temp... ran by the local perfomance exhaust shop and they hooked me up with a nice little 45deg bend FREEBIE
so once everything was connected and the bumper reinstalled and some last minute minor trimming of some of the splash shields from this pic you can see how the radiator is definatly not too low
and for anyone wondering about a percision intercooler check out those turbulators let me know how that compares to your ole ebay core
definatly cools very very well.
10-08-2009, 11:49 PM
Threaded Mode