DLIDFIS on FB

leknaw · 05-25-2009, 04:19 PM

I used an 1/8" aluminum plate. I did noticed how hot the plate gets after been running for a while and did though about using a smal fan as well to generate some air flow for cooling. I have yet to secure the plate somehow so that is not loose. I want to build a bracket that will give room on the back of the plate as well as the front. I was looking at a 2nd Gen coils and the stock bracket looks like it will work. I do have a computer I am ready to trash that I can get the fan out of. Will take a look at it later on today, Thanks!

05-25-2009, 04:19 PM	#4
leknaw Rotary Fan in Training Join Date: Apr 2008 Location: GA Posts: 81 Rep Power: 18	Plate thickness I used an 1/8" aluminum plate. I did noticed how hot the plate gets after been running for a while and did though about using a smal fan as well to generate some air flow for cooling. I have yet to secure the plate somehow so that is not loose. I want to build a bracket that will give room on the back of the plate as well as the front. I was looking at a 2nd Gen coils and the stock bracket looks like it will work. I do have a computer I am ready to trash that I can get the fan out of. Will take a look at it later on today, Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode