brake caliper rebulid & paint

hades · 02-13-2009, 07:34 PM

i have the front calipers pretty much ready to go. Took a wire wheel, wire brush and simple green to them. Repeated rinsing with brake cleaner.

I will probably just use the duplicolor 500 degree paint. I just want to be able to do this job once. I have all my parts in hopefully I can get the fronts rebuilt and on the car this weekend. I am also removing my dp, replacing the belts, plugs, installing my temp sending unit, o2 sensor, trans fluid, diff fluid, and fuel filter. Doubt this will all get done--I need my beer drinking time too.

02-13-2009, 07:34 PM	#8
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	i have the front calipers pretty much ready to go. Took a wire wheel, wire brush and simple green to them. Repeated rinsing with brake cleaner. I will probably just use the duplicolor 500 degree paint. I just want to be able to do this job once. I have all my parts in hopefully I can get the fronts rebuilt and on the car this weekend. I am also removing my dp, replacing the belts, plugs, installing my temp sending unit, o2 sensor, trans fluid, diff fluid, and fuel filter. Doubt this will all get done--I need my beer drinking time too. __________________ This is going to tear

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode