Exhaust System ?'s

SPICcnmFD · 06-26-2008, 07:14 AM

You don't have to pull the engine. It's pretty much just take-off/unhook everything over there off, Intake, IC piping, DP, vac lines, oil lines, coolant lines, etc. If you've never done it, it will probably take 2-4hrs to get them off and a little longer to get them back on. It's not very hard, just a PIA to reach the front oil return line and the 7 or so bolts that hold them to the engine is probably going to be a pain to get off. You may want to spray them wiht some penetrating fluid and let it set over night once you get to that point.

06-26-2008, 07:14 AM	#14
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL Posts: 329 Rep Power: 18	You don't have to pull the engine. It's pretty much just take-off/unhook everything over there off, Intake, IC piping, DP, vac lines, oil lines, coolant lines, etc. If you've never done it, it will probably take 2-4hrs to get them off and a little longer to get them back on. It's not very hard, just a PIA to reach the front oil return line and the 7 or so bolts that hold them to the engine is probably going to be a pain to get off. You may want to spray them wiht some penetrating fluid and let it set over night once you get to that point. __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode