My ongoing project car

N.RotaryTech · 04-18-2011, 11:29 AM

Intercooler piping. I used exhaust tubing from o'reilly auto parts.

Painted.

I modified an intake pipe from a Subaru Impreza and used it for the intake pipe for the turbo. I cut a lot of things off of it to fit and used epoxy to fill the holes and seams.

I cut apart my old cone air filter to make a filter element for the MAF sensor. A normal size filter wouldn't fit in the engine bay.

I installed 750cc injectors in the secondary's and rewired the connectors from S5 to S4.

Parts, gaskets, etc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-18-2011, 11:29 AM	#11
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC Posts: 552 Rep Power: 18	Intercooler piping. I used exhaust tubing from o'reilly auto parts. Painted. I modified an intake pipe from a Subaru Impreza and used it for the intake pipe for the turbo. I cut a lot of things off of it to fit and used epoxy to fill the holes and seams. I cut apart my old cone air filter to make a filter element for the MAF sensor. A normal size filter wouldn't fit in the engine bay. I installed 750cc injectors in the secondary's and rewired the connectors from S5 to S4. Parts, gaskets, etc.