S5 USDM NA to Jspec TII Vacuum Reroute

LunchboxCritter · 03-30-2010, 09:44 PM

Here is what I have so far. I ordered a Jaz oil catch and it should be here tomorrow. Please if you see something wrong let me know.

================================================== ============================================

This is scary looking to me. I could be retarded but shouldn't the wastegate be hooked to a controller?

================================================== ============================================

================================================== ============================================

Some of what all that I removed. I also removed the two hard lines from the oil line that crosses the top front of the short block to the turbo. P.S. the starter is not part of the mod; it is a spare.

03-30-2010, 09:44 PM	#4
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	Here is what I have so far. I ordered a Jaz oil catch and it should be here tomorrow. Please if you see something wrong let me know. ================================================== ============================================ This is scary looking to me. I could be retarded but shouldn't the wastegate be hooked to a controller? ================================================== ============================================ ================================================== ============================================ Some of what all that I removed. I also removed the two hard lines from the oil line that crosses the top front of the short block to the turbo. P.S. the starter is not part of the mod; it is a spare. Last edited by LunchboxCritter; 03-31-2010 at 12:01 AM. Reason: added a picture

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode