|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
|
Thread Tools | Display Modes |
02-18-2010, 12:53 PM
|
#28 |
|
Rotary Fanatic
Join Date: Mar 2008
Location: Brenham, TX
Posts: 335
Rep Power: 18  |
Thought I might update this a little. I made a system for a forum member on the other thread. Redesigned a few things. Came out nice. I used push lock fittings and mounted the solenoid directly to the nozzle to eliminate any chances of dripping after shutoff. Put a meter valve so water flow can be adjusted. Opened the nozzle up to 1mm to increase flow capacity a little more. I took several closeups of the nozzle and how the solenoid is attached.
   
__________________
500+ HP thanks to:  Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap! |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode