FB TII Crossmember

85rx-7gsl-se · 03-24-2009, 08:48 AM

Hello,

I have an 85 GSL-SE with a S4 TII swap. Been running it around for a few years on a modified stock GSL-SE tranny crossmember, but noticed you list one actually made for the TII swap. What is the price on this product?

Thanks in advance,
Nate

Whizbang · 03-24-2009, 11:54 AM

Curious as well

moremazda · 03-24-2009, 05:05 PM

Wow, I didn't think that these would drum up a whole lot of interest right away and haven't even put the car up on stands to take a look.

Well, I know what I am doing this weekend. I'll post up in this thread my progress.

Ryan

2gslse · 03-24-2009, 05:24 PM

While you are at it how bout some more info on the FB comp radiator/pricing

Do you have any plans for a 3" S.S. exhaust for turbo conversions?

moremazda · 03-24-2009, 05:50 PM

Well the radiator is going to come in at $310, and be very similar to the FC radiator that is on the website, although it needs to be a couple inches more narrow it will be the same height, same dual core, dual pass construction and it will take the stock radiator hoses.

I don't have any plans to make an off the shelf exhaust system for the FB.

Ryan

2gslse · 03-24-2009, 07:34 PM

well it looks like i'll be spending money with you also since I am starting my next bild on a 85 gsl

85rx-7gsl-se · 03-31-2009, 08:35 AM

Update?

moremazda · 04-01-2009, 08:49 AM

Quote:

Originally Posted by 85rx-7gsl-se

Update?

Yes. It is actually turning into a mount instead of a cross member. I have a few equally functional designs on paper right now and I am in the process of figuring out which one will be the most cost effective to make, both for me and the guy buying it.

85rx-7gsl-se · 04-01-2009, 11:32 PM

So it would be a mount that would mount to a stock FB crossmember?

moremazda · 04-02-2009, 06:18 AM

Yup. Kind of lack luster huh?

I just don't see how a cross member would carry a good "bang for the buck" ratio, and I would have to offer two versions, one for the S4 and one for the S5.

So it's going to be a mounting kit, It will be the transmissions mount, hardware and new bushings for the ends of the cross member.

85rx-7gsl-se · 04-02-2009, 07:10 AM

Hmm....Will have to see if I can make it work as my factory crossmember has already been hacked :/

85rx-7gsl-se · 05-11-2009, 04:16 PM

Updates?

moremazda · 05-11-2009, 06:01 PM

Yea kind of. I am actually leaning back towards a cross member. Although I have not yet had time to make one, just enough time to crawl under neither the car and give it a serious eyeball.

I am hoping to have the first one made up towards the end of next week sometime.

Ryan

85rx-7gsl-se · 05-11-2009, 06:48 PM

Sounds good

85rx-7gsl-se · 05-25-2009, 11:58 AM

Bump

03-24-2009, 11:54 AM	#2
Whizbang Respecognize! Used to be Gravity Fed Join Date: Jul 2008 Location: Boise, ID iTrader: (4) Posts: 2,735 Rep Power: 7	Curious as well __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-24-2009, 05:05 PM	#3
moremazda shookmotorsports.com Join Date: Apr 2008 Location: Rockford, IL iTrader: (1) Posts: 108 Rep Power: 6	Wow, I didn't think that these would drum up a whole lot of interest right away and haven't even put the car up on stands to take a look. Well, I know what I am doing this weekend. I'll post up in this thread my progress. Ryan

03-24-2009, 05:24 PM	#4
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 419 Rep Power: 6	While you are at it how bout some more info on the FB comp radiator/pricing Do you have any plans for a 3" S.S. exhaust for turbo conversions?

03-24-2009, 05:50 PM	#5
moremazda shookmotorsports.com Join Date: Apr 2008 Location: Rockford, IL iTrader: (1) Posts: 108 Rep Power: 6	Well the radiator is going to come in at $310, and be very similar to the FC radiator that is on the website, although it needs to be a couple inches more narrow it will be the same height, same dual core, dual pass construction and it will take the stock radiator hoses. I don't have any plans to make an off the shelf exhaust system for the FB. Ryan

03-24-2009, 07:34 PM	#6
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 419 Rep Power: 6	well it looks like i'll be spending money with you also since I am starting my next bild on a 85 gsl

04-02-2009, 06:18 AM	#10
moremazda shookmotorsports.com Join Date: Apr 2008 Location: Rockford, IL iTrader: (1) Posts: 108 Rep Power: 6	Yup. Kind of lack luster huh? I just don't see how a cross member would carry a good "bang for the buck" ratio, and I would have to offer two versions, one for the S4 and one for the S5. So it's going to be a mounting kit, It will be the transmissions mount, hardware and new bushings for the ends of the cross member.

05-11-2009, 06:01 PM	#13
moremazda shookmotorsports.com Join Date: Apr 2008 Location: Rockford, IL iTrader: (1) Posts: 108 Rep Power: 6	Yea kind of. I am actually leaning back towards a cross member. Although I have not yet had time to make one, just enough time to crawl under neither the car and give it a serious eyeball. I am hoping to have the first one made up towards the end of next week sometime. Ryan