Go Back   Rotary Car Club > Tech Discussion > Rotary Tech - General Rotary Engine related tech section..

Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc...

Reply
 
Thread Tools Display Modes
Old 03-20-2011, 11:34 PM   #16
RICE RACING
Don Mega
 
RICE RACING's Avatar
 
Join Date: Dec 2008
Location: Utopia
iTrader: (0)
Posts: 1,688
Rep Power: 11
RICE RACING will become famous soon enough
Default

Quote:
Originally Posted by PercentSevenC View Post
I'm very interested in trying a purely mechanical pre-turbo water injection setup. From what I've read, compressor damage is just from erosion at the blade tips when the water isn't adequately atomized (and doesn't seem to be a particularly big issue). Nozzle selection is key here.

Now, what I want to know is how big a problem condensation is if you also run a conventional intercooler in addition to pre-turbo WI.
No its not a problem at all in regards to charge coolers.

Pre turbo injection is the only way for MAXIMUM performance, proved it over and over many years, and unlike GAYclub contributors have records and many customers to prove it.. oh and a car that runs too LOL unlike BDC and his friends






__________________
www.riceracing.com.au
Worlds best
Apex Seals
Coil on Plug
Water Injection
ECU Calibration
RICE RACING is offline   Reply With Quote
Old 03-20-2011, 11:37 PM   #17
RICE RACING
Don Mega
 
RICE RACING's Avatar
 
Join Date: Dec 2008
Location: Utopia
iTrader: (0)
Posts: 1,688
Rep Power: 11
RICE RACING will become famous soon enough
Default

This thread is more about debunking GAYclub and its spammers who hold more penis than any relevant qualifications....

There are hundreds of posts there that are truely disturbing and infuriating for the total mistruths and basic rantings of internet guru's nothing more nothing less.
__________________
www.riceracing.com.au
Worlds best
Apex Seals
Coil on Plug
Water Injection
ECU Calibration
RICE RACING is offline   Reply With Quote
Old 03-21-2011, 12:46 AM   #18
diabolical1
I have radioactive semen
 
Join Date: Jul 2008
Location: in a bottle of Glenfiddich
iTrader: (0)
Posts: 243
Rep Power: 11
diabolical1 is on a distinguished road
Default

Quote:
Originally Posted by RICE RACING View Post
This thread is more about debunking GAYclub and its spammers who hold more penis than any relevant qualifications....
i'm sorry guys, this is just too damn funny not to quote.

carry on now ...
__________________
Quote:
Originally Posted by RICE RACING View Post
This thread is more about debunking GAYclub and its spammers who hold more penis than any relevant qualifications ....
diabolical1 is offline   Reply With Quote
Old 03-21-2011, 07:46 AM   #19
My5ABaby
Sigh.....
 
My5ABaby's Avatar
 
Join Date: Feb 2008
Location: Murfreesboro, TN
iTrader: (6)
Posts: 2,377
Rep Power: 13
My5ABaby will become famous soon enough
Default

Quote:
Originally Posted by NoDOHC View Post
For what it's worth Peter, I prefer technically informative posts over name-calling. It doesn't seem to help anyone's knowledge on the topic to learn about your opinion of the people who posted the information. Let the evidence stand for itself and let people form their own opinions.
+1

Why degrade our forum with name calling and ranting? Just give us the info, prove they're wrong, and people will draw their own conclusions which is far more powerful in helping people realize the RX7Club tends to be full of crap than ranting and name calling.
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles

Community Service Manual

RotorWiki

"Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel

Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."
My5ABaby is offline   Reply With Quote
Old 03-25-2011, 06:08 PM   #20
RotaryXperiment
Rotary Fanatic
 
Join Date: Mar 2008
Location: Bradenton, Fl
iTrader: (0)
Posts: 136
Rep Power: 11
RotaryXperiment is on a distinguished road
Default

im running pure water too, but not as much as alot of pople are.
im running a m2 pre turbo and m10 post.
RotaryXperiment is offline   Reply With Quote
Old 03-25-2011, 08:30 PM   #21
RICE RACING
Don Mega
 
RICE RACING's Avatar
 
Join Date: Dec 2008
Location: Utopia
iTrader: (0)
Posts: 1,688
Rep Power: 11
RICE RACING will become famous soon enough
Default


You want to learn about water injection (internets) you look here > http://www.aquamist.co.uk/vbulletin/index.php


You want to learn how to be a nobody with hockey puck engine mounts or how to start a thread on testing turbo's when you cant even afford basic testing equipment then you read RX7Club Pay to Play trash commentary site.
__________________
www.riceracing.com.au
Worlds best
Apex Seals
Coil on Plug
Water Injection
ECU Calibration

Last edited by RICE RACING; 03-25-2011 at 08:45 PM..
RICE RACING is offline   Reply With Quote
Old 03-26-2011, 01:38 AM   #22
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
iTrader: (4)
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Default

Hockey puck motor mounts are too expensive for bdc, the level of his engineering genius led him to believe that 2x4 lumber cut into squares, and probably not even square at that, with a bolt running through them would make an adequate motor mount..... and this is the guy people are PAYING to work on their cars? I'm sorry, but anyone who will defend lumber as a good substitute for a motor mount needs to not own tools..... dollars to donuts says his two favorite tools are visegrips and a claw hammer.
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
TitaniumTT is offline   Reply With Quote
Old 03-26-2011, 06:50 AM   #23
2gslse
Rotary Fanatic
 
Join Date: Apr 2008
Location: front royal va
iTrader: (0)
Posts: 440
Rep Power: 11
2gslse is on a distinguished road
Default

Hockey puck motor mounts are too expensive for bdc, the level of his engineering genius led him to believe that 2x4 lumber cut into squares, and probably not even square at that, with a bolt running through them would make an adequate motor mount.....


at least he used a bolt and not a nail bent over in the block of wood.
__________________
____________________________________________
1976 Cosmo needing lots of work
1993 Rx-7 410 RWHP single turbo toy
1985 Rx-7 toy/project car 411HP stoplight terror
2001 Dodge ram 4wd.parts hauler
2016 Ram 2500 cause its a hemi
2006 VW TDI commuter
__________________________________________


I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...
2gslse is offline   Reply With Quote
Old 03-26-2011, 07:05 AM   #24
RICE RACING
Don Mega
 
RICE RACING's Avatar
 
Join Date: Dec 2008
Location: Utopia
iTrader: (0)
Posts: 1,688
Rep Power: 11
RICE RACING will become famous soon enough
Question 25psi non intercooled Helltech E6GAY screen dump hero!

I really do miss reading Dumb and Dumber's posts ........... where is he? been so quiet lately, maybe started harvesting his own meth?
__________________
www.riceracing.com.au
Worlds best
Apex Seals
Coil on Plug
Water Injection
ECU Calibration
RICE RACING is offline   Reply With Quote
Old 03-26-2011, 12:57 PM   #25
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
iTrader: (4)
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Default

Quote:
Originally Posted by 2gslse View Post
Hockey puck motor mounts are too expensive for bdc, the level of his engineering genius led him to believe that 2x4 lumber cut into squares, and probably not even square at that, with a bolt running through them would make an adequate motor mount.....


at least he used a bolt and not a nail bent over in the block of wood.
Ya know, I was assuming that he bolted it down, we all know that assumption is the mother of all f*ck ups, and to spell assume... well, it makes an ass out of U-M-E. It very well could've been a nail
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
TitaniumTT is offline   Reply With Quote
Old 03-26-2011, 05:36 PM   #26
PercentSevenC
Custom User Title
 
PercentSevenC's Avatar
 
Join Date: Feb 2008
Location: Seattle, WA / Pullman, WA
iTrader: (0)
Posts: 350
Rep Power: 11
PercentSevenC is on a distinguished road
Default

Hey, don't bash hockey puck motor mounts. They may be ghetto, but they work great.
__________________
Quote:
Originally Posted by Benjamin Franklin
Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety.
PercentSevenC is offline   Reply With Quote
Old 03-26-2011, 11:51 PM   #27
speedjunkie
RCC Loves Me Not You
 
speedjunkie's Avatar
 
Join Date: Mar 2008
Location: Colorado Springs, CO
iTrader: (1)
Posts: 2,072
Rep Power: 13
speedjunkie is on a distinguished road
Default

^I was thinking about using some for my mounts LOL.
speedjunkie is offline   Reply With Quote
Old 03-27-2011, 12:45 AM   #28
Mazdabater
FC3S
 
Join Date: Jun 2010
Location: Townsville, QLD, AUS
iTrader: (0)
Posts: 326
Rep Power: 9
Mazdabater is on a distinguished road
Default

Fuck me, you shouldn't be owning a 7 if your too poor to buy engine mounts.
Mazdabater is offline   Reply With Quote
Old 03-27-2011, 12:46 AM   #29
rx71king
Rotary Fanatic
 
rx71king's Avatar
 
Join Date: Jul 2009
Location: queens ny
iTrader: (0)
Posts: 118
Rep Power: 10
rx71king is on a distinguished road
Default

i like my banzai mounts..http://www.banzai-racing.com/cgi-ban...r+mounts&Go=Go
rx71king is offline   Reply With Quote
Old 03-27-2011, 01:27 AM   #30
PercentSevenC
Custom User Title
 
PercentSevenC's Avatar
 
Join Date: Feb 2008
Location: Seattle, WA / Pullman, WA
iTrader: (0)
Posts: 350
Rep Power: 11
PercentSevenC is on a distinguished road
Default

Quote:
Originally Posted by Mazdabater View Post
Fuck me, you shouldn't be owning a 7 if your too poor to buy engine mounts.
Haters gonna hate.

Actually, I've used both and I like hockey pucks better than the Mazda competition mounts. The hockey pucks are a bit stiffer and are theoretically less likely to break (though I've never actually heard of a Mazda competition mount breaking). The Banzai mounts look great, but I just haven't felt the need to spend the money when hockey pucks are working so well in both my FB and my REPU.
__________________
Quote:
Originally Posted by Benjamin Franklin
Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety.
PercentSevenC is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 08:32 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com
Ad Management by RedTyger